https://youtu.be/gaj_2e98Wi8

To be used on:	On surface and/or materials:
Deep scratches	Wood Window, indoor
Pressure marks	Wood Doors, indoor
Small holes	Wood flooring, lacquered
Damaged edges	Laminate flooring
Chips	Plastic surface
	Wood surface, lacquered
	Cork surface
	Kitchen Cabinet and countertops

It's that easy …
Preparation: The area to be repaired has to be clean, dry and free from grease. If necessary, remove any loose or protruding particles. Choose Colours: Choose matching colours. Make sure to always apply several colours from light to dark. With real wood surfaces, always mix colours with Transparent (900) to achieve a depth effect. Melting an Mixing: Activate the melter as described on the back - the melting blade heats up immediately. Melt small portions of filler and mix. Filling: Let wax mixture flow into the damage area. Note: Always slightly overfill the area! Levelling: Use the sharp grooves of the Special Fillers Applicator to strip off excess material. Precise Adjustment: For precise adjustment, imitate the grain pattern with a darker hue of filler. Then again, level off excess material with the planer grooves. Degreasing: Use the grey sanding pad to degrease the area. This will simulatenously flatten the gloss level of the repaired area. Sealing: To protect against dust and dirt, apply a sealant using the AQUA Brush Pen Clear Lacquer. Apply the lacquer evenly in one direction to the repaired area. If possible, do not apply lacquer to the surroundings. If lacquer flow decreases, squeeze area marked “P/PRESS” again and slightly dab brush tip on the Cotton Cloth. After use, wash out brush tip with water and dab dry on a cloth. Sheen Level Adjustment: When the repaired area is dry (after approx. 10-15 minutes at room temperature), the sheen level can be adjusted with the Sanding and Polishing Cloth. The green side of the cloth polishes while the white side reduces the sheen level. 

• Application example: Scratches on wood or laminate
• Application example: Branchhole on lacquered surface
• Application example: Small hole in a laquered wood surface
• Application example: Repair of a dent
• Application example: Small hole in a cork surface
• Application example: Scratches on a dining table
• Application example: Damaged edge on a worktop
• Application example: Damage to interior wood window frame

https://www.heinrich-koenig.de/media/63/f6/eb/1724665955/G61403_Picobello_PREMIUM-Reparatur-Set_Instructions_lackiert-Oberflaechen.pdf

AQUA Brush Pen Clear Lacquer | Hazard statememt: Contains 1,2-benzisothiazol-3(2H)-one. May cause allergic reactions.  
Hard Wax | Hazard statement: Caution! Hazardous respirable dust may be generated during use. Do not inhale dust.